Power Save Setting; Microwave Function - Pelgrim PCM142RVS Anleitung

OPERATION

Power save setting

Microwave function

EN 14
You can 'switch off' the microwave display in order to save power.
The microwave is connected to the mains power, but nothing is
visible on the display if the microwave is not in use. If the appliance
is not in use for 10 seconds it automatically switches to the power
save setting.
Switch on the power save setting:
• Press the 'Stop' button for 3 seconds.
Nothing is shown on the display.
Switch off the power save setting:
• Open and close the door.
With this function you can select the power yourself which you
want to use to cook the dish. The highest power output is 100%,
while the lowest is 10%.
1. Turn the function knob to the 'microwave' function.
The display shows the microwave indicator, and the power
'100%' and 'SET TIME' appear alternately.
2. Press again (a number of times) on the function button to set the
power. Each press of the button decreases the power by 10%.
The display shows alternately the set power and 'SET TIME'.
3. Turn the 'time' dial to set the time.
▷ You can set a time up to 60 minutes.
▷ Turn the 'time' knob anticlockwise to go to 60 minutes
straight away, or turn clockwise to start from 0 seconds.
The display shows the set time, and a moment later the power
and the text 'PRESS START' alternately.
4. Press the start button.
The microwave starts with the chosen settings; the microwave
light comes on, the turntable starts rotating and the time in the
display counts down.
• You can increase or decrease the set time during cooking in
1-minute steps. To do that, press the 'more' or 'less' button.
• You can check the set power at any moment during the cooking
by pressing the function button. The set power appears in the