Mains Cable - Silvercrest SIKP 2000 D1 Bedienungsanleitung


You can damage the induction hotplate by trying to
scrape caramel off it. If you do spill food containing
sugar, remove it immediately before it cools. In general,
any food spillages should be removed immediately.

Do not use abrasive or astringent detergents or tools
which could scratch the surface. These could damage the
hotplate.

The induction hotplate has non-slip plastic feet. If
necessary, place something underneath the device, as
work-surfaces are sometimes treated with detergents
which could attack or even dissolve the plastic feet.

Mains cable

Always hold the power cable by the mains plug and never
pull on the cable itself. Never place the device, furniture or
any other heavy objects on the cable and take care that the
cable does not become trapped. Never tie knots in the
mains cable and do not tie it to other cables. All cables must
be laid so that nobody can trip over them or be obstructed
by them. Never use adapter plugs or extension cables that
do not comply with the safety regulations applicable in your
country, and do not modify the power cord yourself. Any
damaged power cord must be replaced by the manufacturer
or authorised customer service.
The induction hotplate is not designed to be used with an external
timer or a separate remote control system.
SilverCrest SIKP 2000 D1
English - 13