6.
Click the Options button in the upper right of the window.
A window opens where you can set the recording parameters.
7.
Check the signal quality in the online ECG which is displayed
next to the patient data.
The electrode placement guide is displayed on the right below
the online ECG.
8.
If the signal quality is sufficient click the Start recording but-
ton.
9.
Click the Close button to close the online connection and the
window.
4 Resetting the recorder
If there are patient records and events on the recorder that have
already been saved and should be removed you can reset the re-
corder by following these steps:
1.
Open the Hookup window in CardioDay and enable Bluetooth
on the recorder.
2.
Select CM 100 XT (BT) to reset a recorder.
3.
Click the Add recorder button.
78822011
CardioMem
CM 100 XT @ CardioDay
®
English
®
25