getemed CardioMem CM 100 XT Installationsanleitung Seite 22

English
4. Enable Bluetooth on the recorder by pressing the key until a
tone sequence sounds and the LED of the recorder flashes
blue.
5. Click the „+" button.
6. Select Bluetooth.
After a few seconds the recorder will be displayed with its se-
rial number in the list.
7. Click the entry of the recorder in the list, so that Windows 10
performs the pairing.
After successful pairing, a beep will sound on the recorder
and the blue LED will flash fast.
8. While the blue LED is still flashing, press the button on the
recorder to confirm the pairing.
The recorder acknowledges your confirmation of the pairing
with a tone sequence.
22 CardioMem CM 100 XT @ CardioDay
®
78822011
®