English - getemed CardioMem CM 100 XT Installationsanleitung

1 Prerequisites
For using the CardioMem CM 100 XT with CardioDay the following
prerequisites have to be met:
CardioDay Version 2.5 SP3 and above

the CardioDay Event recorder option

Windows 10 Operating System

Bluetooth dongle LogiLink BT0015

Note: These installation instructions do not replace the oper-
ating manuals of CardioMem CM 100 XT and CardioDay.
Always use the respective operating manuals to use
both products.
Note: As long as the CardioMem CM 100 XT is in connection
with CardioDay the recorder can not be used in the
Tele ECG mode. The mode can be changed using the
CM 100 Configurator software.
2 Bluetooth pairing of recorder and PC
Proceed as follows to pair the recorder with Windows:
1. Switch on the recorder.
2. Right-click the Windows Bluetooth-Icon.
3. Right-click the Add Bluetooth device option.
78822011 CardioMem CM 100 XT @ CardioDay
®

English

®
21