How To Change The Settings On Your S8 Escape - ResMed S8 Escape Bedienungsanleitung

B
ACKLIGHTS
The keypad and LCD are equipped with backlights that come on when the device is
powered. The LCD backlight turns off after two minutes of inactivity, and comes back
on when you press a key. Once the Start/Stop key has been pressed to start
treatment, the LCD backlight stays on for two minutes. The keypad backlight is always
on while the
H
OW TO
You can change settings (such as Ramp Time, Altitude) on the
keypad and LCD. When the
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.
Use the menu screens to change the ramp time, altitude compensation and language.
You can also view details about the usage and software version of your
H
When the
left-hand corner. To select the
H
When you are in the menu, scroll through items by pressing the Up or Down keys.
H
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
Downloaded from www.Manualslib.com
S8 E is on.
SCAPE
C S
HANGE THE ETTINGS ON YOUR
S8 ESCAPE
PATIENT MENU
S8 CLASSIC
S8 CLASSIC RAMP 10min
Menu
ALT: 0-610m
Change Exit
Exit
USAGE: 120/180
Exit
LANG: ENGLISH
Change Exit
SW: SX123456789
Exit
OW TO ENTER THE MENU SCREENS
S8 E standby screen is displayed you will see the word 'Menu' in the
SCAPE
OW TO SCROLL THROUGH THE MENU
OW TO CHANGE A SETTING OPTION
manuals search engine
S8 E
S8 E is in standby mode you can display a series of
SCAPE
S8 E menu, press the Left key.
SCAPE
SCAPE
S8 E
by using the
SCAPE
S8 E
H K
OW TO USE THE EYPAD
.
SCAPE
15