Werbung
Verfügbare Sprachen
Verfügbare Sprachen
H
OW TO
A
TTACH A
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i
manual.
The
humidification. No other accessories are required for its use
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
b. Remove the connector plug on the S8 Escape (see section A of the illustrations
S
Store the
not in use.
A
TTACH A
Please refer to the illustrations in section I of the illustration sheet.
To connect your
(52 cm) air tubing.
1
Fill the
medium (52 cm) and long (2 m) air tubing (I-1), and close the humidifier lid.
2
Place the
medium air tubing to the air outlet (I-3).
Note: To avoid water spilling into the S8 Escape, do not put it underneath the humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (I-4).
4
Plug the
cord to the socket at the rear of the
outlet.
Please refer to the HumidAire User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The
Downloaded from
www.Manualslib.com
A
TTACH A
H
A
3
H
UMID
IRE
i
H
A
3i
attaches to the front of the
UMID
IRE
detach the humidifier.
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
H
A
TORING THE
UMID
IRE
H
A
3i
in the larger mesh-top pouch of the
UMID
IRE
H
A
H
UMID
IRE
UMIDIFIER
S8 E
SCAPE
H
A
water chamber and place inside the
UMID
IRE
S8 E
on top of the
SCAPE
H
A
power cord into a power outlet. Connect the
UMID
IRE
S8 E
is now ready for use with the
SCAPE
manuals search engine
H
UMIDIFIER
UMIDIFIER
S8 E
3
i
to a
H
A
humidifier you need medium sized
UMID
IRE
H
A
(I-2) and connect the free end of the
UMID
IRE
S8 E
and plug the other end into a power
SCAPE
H
UMID
to provide heated
SCAPE
.
S8 E
carry bag when
SCAPE
H
A
. Connect the
UMID
IRE
S8 E
SCAPE
A
.
IRE
H
A
H
OW TO
TTACH A
power
13
UMIDIFIER
Werbung
Kapitel
Fehlerbehebung
