Tuner; Listening To The Radio - Pioneer DEH-P4400R Handbuch

Tuner

Listening to the radio

These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 10.
This unit's AF (alternative frequencies search)
function can be switched on and off. AF should
be off for normal tuning operation (refer to page
14).
1 indicator
BAND
Shows which band the radio is tuned to, MW,
LW or FM.
2
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
PRESET NUMBER
Shows what preset has been selected.
4
STEREO
Shows that the frequency selected is being
broadcast in stereo.
1 Press
SOURCE
2 Use
VOLUME
Rotate to increase or decrease the volume.
Downloaded from www.Manualslib.com
1 4 2
indicator
indicator
() indicator
to select the tuner
to adjust the sound level.
manuals search engine
3 Press
Press
BAND/ESC
played,
F1
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
3
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
light.
.
to select a band
BAND/ESC
until the desired band is dis-
, , for FM or .
F2 F3 MW/LW
indicator will
STEREO ()
Section
03
.
En 9