Multi-Cd Player; Playing A Cd; 50-Disc Multi-Cd Player - Pioneer DEH-P4400R Handbuch

Section

Multi-CD Player

06

Playing a CD

You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 23.
1
DISC NUMBER
Shows the disc currently playing.
2
TRACK NUMBER
Shows the track currently playing.
3
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
SOURCE
player.
Press
SOURCE
2 Use
VOLUME
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
1
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
22 En
Downloaded from www.Manualslib.com
2 3
indicator
indicator
indicator
to select the multi-CD
until you see
Multi-CD
to adjust the sound level.
for disc 7, until the disc number
manuals search engine
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
1
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine,

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.
displayed.
is displayed.
READY
ERROR-14
is displayed.
NO DISC
may