Reviewing Previous Results; Reviewing The Previous Results - Micropoint qLabs ElectroMeter Handbuch

10. Reviewing Previous Results

10.1 Reviewing the Previous Results

Follow these steps to review previous results that are stored in the meter
memory.
OFF
SET MEM
VER
RESULTS
REVIEW
DELETE
BACK
OK
01/01 PID0001
01/02 PID0002
02/01 PID0013
02/02 PID0015
OK
NO RECORD
Whenever a test is successfully performed, the result is automatically
stored in the meter memory along with the date of the test. The meter
memory will store up to 200 results.
In the test mode where the display prompts
the user to insert a test strip.
Press the "MEM" button. The qLabs
ElectroMeter will enter the "Review/Delete"
interface.
Select "Review" to enter Memory mode for
reviewing previous results.
If no previous results exist, the meter will
prompt "NO RECORD!".
22
EN
®