Finishing The Test - Micropoint qLabs ElectroMeter Handbuch

• Unexpected Results:
When the qLabs
expected therapeutic range, it may or may not be due to an unusual
clinical situation.
What to do:
When you encounter an unexpected result, please repeat the test
with a fresh qLabs
immediately consult with your medical professional.
For self-testing users, contact your health care provider if
you have questions about your test results and any actions
you should take.
NOTE:
• Please read the qLabs
detail on the above content.

9.9 Finishing the Test

Remove and discard the used test strip into a sharps or other puncture
proof container. It is recommended to power off the qLabs
when it is not in use.
11.6 PT 0.8 INR
8.2 QC
OFF
SET MEM
VER
NOTE:
• If performing another test with a fresh test strip, please use a
different finger for the new test.
ElectroMeter displays a PT-INR result outside of the
®
PT-INR test strip. If the same result is obtained,
®
PT-INR Test Strips Package Insert for more
®
Before turning off the meter, press the "
button to return to the test mode.
Remove the test strip.
21
EN
ElectroMeter
®
"