elevatIon anD lateral aDjustMent
In case of variations in the point of impact,
adjustment of the reticle to the weapon is
required. This is done using the two adjusting
towers - (5) for the elevation, (6) for lateral,
with both adjusted in the same way:
First unscrew the cap (5.a/6.a) counter
clockwise. Once the cap is removed, the
knurled dial 5.b/6.b is visible, along with the
associated scale 5.c/6.c and the correspond-
ing index point 5.d/6.d. The knurled dials are
very precisely graduated, with one click
corresponding to 1cm at 100m.
If the point of impact is high, requiring
downward correction, turn the knurled dial 5.b
counter clockwise, or clockwise to correct
upwards if the point of impact is low.
Make the lateral adjustments in the same way:
If the point of impact is right, requiring
correction to the left, turn the knurled dial 6.b
counter clockwise, or clockwise to correct to
the right if the point of impact is left.
"zeroIng" the tower scales
(same procedure for both towers)
The process is initially the same as that
described in the previous section.
Then,
1. unscrew the clamping screw with a
Phillips head screwdriver (size PH 00), and
14