Changing The Magnification - Leica ERi 2,5–10x42 Anleitung

2. hold the knurled dial 5b/6b in the relevant
position while simultaneously turning the
scale 5c/6c so that the zero is aligned
with the index point 5d/6d.
3. Finally, this setting is fixed by tightening
the clamping screw.
Once you have done this for both scale dials,
you can reliably make the initial setting at the
zeroing range after any kind of adjustment by
returning to the 0 positions, without the need
to remember or make a note of anything.

changIng the MagnIfIcatIon

To change the magnification, turn the dial (4)
- to the right to reduce the magnification and
to the left to increase it. The cam 4.1 improves
orientation in darkness: If it is pointing
upwards, the middle magnification is set, e.g.
on the Leica ER 3-12 x 50 this is 6.
15