Impact Point Correction Using Elevation Adjustment (Click/Moa Adjustment); Settings And Selection Of Ballistic Output Formats - Leica GEOVID HD-R2700 Anleitung

EN IMPACT POINT CORRECTION USING ELEVA-
TION ADJUSTMENT (Click/MoA adjustment)
(only HD-B 3000)
Variations in the point of impact can be compen-
sated by adjusting the reticle on your rifle scope
accordingly.
Based on the measured distance, bullet trajectory
and the set zeroing distance (see p. 51), your Leica
Geovid HD-B will display the relevant setting adjust-
ments, i.e. the number of clicks required.
For the different elevations, you can specify
whether the click levels will be
– based on the international standard MOA (min-
utes of angle) graduation, or
– displayed in 5 or 10 millimeter increments.
54
SETTINGS AND SELECTION OF BALLISTIC
OUTPUT FORMATS
Start with step 1 if you have not previously opened
the menu control, or with step 3 if you have just set
the zeroing distance and
display.
1. Press and hold the secondary/menu button
(≥ 2 s).
• appears.
EU.US
2. Press and hold the secondary/menu button
3 times (≥ 2 s).
• The display switches from
3. Select the desired ballistics setting by pressing
the main/trigger button
– (HD-B and HD-R)
EHr
– only on HD-B 3000:
– , or
HOLd
– (1 MOA as a decimal value) or
1-1
– ( ⁄ MOA) or
1
1-3
3
– (¼ MOA) or
1-4
–
10
–
5
4. Save your setting by briefly pressing the sec-
ondary/menu button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display disap-
pears.
is still flashing in the
ABC
2
and to
bALL SId ABC
repeatedly.
1
.