Turning The Camera On And Off; Setting The Language - Concord Eye-Q 3042AF Schnellstartanleitung

GETTING STARTED

TURNING THE CAMERA ON AND OFF

The Power Button is located on the top of the camera. (fig.1.1)
1. Press the ( ) Power Button to power the camera on.
• The LCD will turn on automatically
2. To turn the camera off, press the (
Note:
To extend battery life, the LCD will be off after 1 minute of inactivity, press (
LCD. The camera will automatically power off after 2 minutes of inactivity, press the Shutter Button to power
the camera back on.

SETTING THE LANGUAGE

When the camera is powered on for the first time, the Language menu will appear.
Setting the Language
1. Turn the camera on.
• The Language Setup screen will appear on the LCD.
2. Press to highlight the language you would like to use.
3. Press the OK button to select.
4. The next screen will read "Are You Sure?" press
5. Press the OK button to confirm the selection.
• If you select No, you will return to the Language select screen.
• If you select Yes, all menu screens will be displayed in the new language.
) Power Button.
to select No or Yes.
A
AWB
3
fig.1.1
) button to reactivate the
LANGUAGE OPTION
English
Français
Deutsch
Italiano
Español
RETURN
LANGUAGE OPTION
A
Nederlands
AWB
RETURN
003/016
AWB
A
AWB
SET
OK
003/016
AWB
SET
OK
003/016