Loading The Batteries; Turning The Camera On And Off; Setting The Flash - Concord Eye-Q Duo 2000 Kurzanleitung

LOADING THE BATTERIES

The Concord Eye-Q Duo 2000 uses 2x AA LR6 (sold separately)
batteries.
To load the batteries:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of
the camera. (fig.1.1)
3. Lift the battery door to open.
4. Insert the batteries with the positive terminal toward the +
sign, and the negative terminal toward the – sign. (fig.1.2)
5. Close the battery door.

TURNING THE CAMERA ON AND OFF

When the camera is turned on, the camera ready LED on the
back of the camera blinks and the LCD displays the current
settings.
1. Press the Power button.
2. The camera is ready for picture taking when the camera
ready LED stops blinking and LCD icons appear on the LCD.
(fig.1.3)
3. To turn the camera off, press the Power button.

SETTING THE FLASH

1. In the FLASH menu, press
and Flash Off (
2. Press OK to select the flash mode and press MENU to exit.
Downloaded from www.Manualslib.com
MAIN MENU
Mode
M
Size
Quality
Flash
).
manuals search engine
FLASH
Auto
A
Flash
Flash Off
OK
or to choose between Auto (
2
fig.1.1
fig.1.2
fig.1.3
MENU
), Flash (
A
),