Inserting An Sd Card; Turning The Camera On; Setting The Language - Concord 6340z Kurzanleitung

3

INSERTING AN SD CARD

The digital camera is equipped with a 16 MB internal memory. If no SD card
is inserted in the camera, all pictures/video clips recorded by the camera will
be stored in the internal memory. When SD card is inserted in the camera, all
pictures and video clips recorded by the camera will be stored on the SD card
1. Turn off the camera.
2. Slide the Battery/Memory Card Door in the direction of the button to open
the door.
3. Insert the SD card in the direction as shown in the figure aside.
4. Close the Battery/Memory Card Door.
4

TURNING THE CAMERA ON

Slide the Power Switch to the right side and hold it until the green status LED lights up. It takes about 2
seconds to power on the camera.
Note:
1. You may also press and hold the
than 1 second to turn the camera on in Review mode to
review the stored pictures/video clips.
2. If the camera cannot be powered on, the batteries may be
drained. Recharge the battery and try again.
5

SETTING THE LANGUAGE

1. Press the MENU button.
2. Press the
3. Press the
4. Press the
5. Press the MENU button to close the menu window.
Downloaded from www.Manualslib.com
button to select the Setup Menu.
or button to select the desired Language.
or button to select a Language.
manuals search engine
button for more
2