Inhaltsverzeichnis
Werbung
DRAWINGS | DISEGNI | DESSINS | DraWINGS | DIBUjOS
10 | DYNAMIC MODE - BELAYING THE SECOND IN TOP ROPE
During the abseiling at all times hold the free end of the rope in your hand!
10.1
SETUP
Before starting clim-
bing, setup the system
as in 7.1÷ 7.4.
11 | CLICK UP MODE - CLASSIC ABSEILING
With alpine Up you can abseil in a classic way: it works like a classic tuber descender and must be combined with a Prusik knot.
During abseiling at all times hold firmly the free end of the rope in your hand!
11.1
SETUP
Belay yourself to the belay
station, install the device
as in 7.1÷ 7.4 and tie
a Prusik knot on the rope
below the device.
WEB_IST12-2D651CT rev.2 11-12
10.2
BELaYING
With one hand pull the free
end of the rope through the
device; with the other pull the
climber's rope towards the
device.
11.2
TENSIONING
Tension the Prusik knot
with both hands so that
you can be suspended on
the rope.
- 8 -
10.3
WarNING!
NO!
During the belaying (10.1÷
10.2) hold firmly the free
end of the rope in your
hand at all times!
11.3
rELEaSING ThE SLING
With one hand hold firmly
the free end of the rope,
than release the sling and
disconnect the karabiner
from the belay station.
www.climbingtechnology.com
11.4
aBSEILING
Control the Prusik knot
with one hand on the
rope; with the other hand
control the rate of descent.
Werbung
Inhaltsverzeichnis
