Climbing Technology ALPINE UP Gebrauchsanweisungen Seite 4

DRAWINGS | DISEGNI | DESSINS | DraWINGS | DIBUjOS
4 | CLICK UP MODE - BELAYING IN TOP ROPE
Even if the device is in the locked position, during belaying at all times hold the free end of the
rope in your hand!
4.1
SETUP
Before starting climbing,
take up slack (Fig. 2.2)
and activate the device in
lock mode.
5 | CLICK UP MODE - ABSEILING IN A SELF-LOCKING WAY
To familiarize yourself with the device during your first descents, it is recommended to use a Prusik knot under
the alpine Up (see 6). During the abseiling at all times hold the free end of the rope in your hand!
5.1
SETUP
Belay yourself to the belay
station using a sling, connect
the karabiner to the belay
loop and insert the rope in the
device.
WEB_IST12-2D651CT rev.2 11-12
4.2
BELaYING
With one hand pull and
feed the free end of the
rope through the device,
with the other pull the
climber's rope towards it.
5.2
TESTING / LOCKING
Install the Alpine UP in the
sling and activate it in lock
mode as instructed under
point 1.5.
- 4 -
4.3
WarNING!
NO!
During the belaying (4.1
- 4.2) always hold the
free end of the rope in
your hand!
5.3
rETrIEVING ThE rOPE
Take up the slack as instructed
under point 4.2 and use your
own weight to tension the
ropes and the device.
www.climbingtechnology.com