Climbing Technology ALPINE UP Gebrauchsanweisungen Seite 3

DRAWINGS | DISEGNI | DESSINS | DraWINGS | DIBUjOS
2 | CLICK UP MODE - BELAYING THE LEADER
Before start belaying it is mandatory to test the correct functioning of the device!
During belaying at all times hold the free end of the rope in your hand!
2.5
WarNING!
NO!
During the belaying (2.1÷
2.4) always hold the free
end of the rope in your
hand!
3 | CLICK UP MODE - SAFE, EVEN IN CASE OF ERROR
In case of error stop the ascent and lower the climber.
During belaying at all times hold the free end of the rope in your hand!
3.1
WarNING!
The Alpine Up is positio-
ned correctly but the rope
is inserted in a wrong way:
stop immediately the
ascent!
WEB_IST12-2D651CT rev.2 11-12
2.6
OK!
OK!
When ascending a multi-
pitch route, the rope must
pass through a directional
anchorage on the belay
point.
3.2
SaFE LOWErING
Place the rope in the
braking groove A, ac-
company it towards the
device with both hands
and lower the climber.
2.7
WarNING!
NO!
Always pass the leader
rope through a directional
anchorage, on the belay
station. If not, danger of
death!
3.3
WarNING!
The Alpine Up is positio-
ned incorrectly and the
rope is inserted in a wrong
way: stop immediately
the ascent!
- 3 -
3.4
SaFE LOWErING
Place the rope in the
braking groove A, ac-
company it towards the
device with both hands
and lower the climber.
www.climbingtechnology.com