Inhaltsverzeichnis
Werbung
DRAWINGS | DISEGNI | DESSINS | DraWINGS | DIBUjOS
1 | CLICK UP MODE - INSTALLATION AND SETUP
This mode is ideal for use on well-equipped multi-pitch sport climbing routes with fixed anchors, such as bolts or glue-in anchors.
A safety check between the climber and the belayer is essential before start climbing!
1.1
1.2
SETUP
SETUP
Connect the
Insert the loop of the rope
karabiner to
in the slot B, referring to
the belay loop
symbols 1-4 on the de-
of the harness.
vice. With single rope,
use the slot opposite
the karabiner gate.
2 | CLICK UP MODE - BELAYING THE LEADER
Before start belaying it is mandatory to test the correct functioning of the device!
During belaying at all times hold the free end of the rope in your hand!
2.1
GIVING SLaCK
With one hand, bend
the free end of the rope
and feed it through the
device; with the other pull
the climber's rope.
WEB_IST12-2D651CT rev.2 11-12
1.3
1.4
SETUP
SETUP IS OK!
Insert the karabiner
The system is OK.
in the hole F with
From now on
the rope inside.
always hold the
Close the karabi-
free end of the
ner gate!
rope in your
hand!
2.2
TaKING UP SLaCK
With one hand pull the
free end of the rope
through the device; with
the other pull the climber's
rope towards the device.
- 2 -
1.5
LOCKING TEST
Check the device
works correctly
before use, verifying
that it locks the
rope with a typical
"CLICK" sound.
2.3
arrESTING a FaLL
Hold the free end of the
rope firmly in one hand
and pull it downwards.
Don't hold the device
in your hands!
www.climbingtechnology.com
1.6
rELEaSE
To start belaying
a leader, push the
device forwards to
return the karabi-
ner to position F.
2.4
LOWErING
Open the lever H and
push it downwards, with
the other hand feed the
free end of the rope
through the device.
Werbung
Inhaltsverzeichnis
