Siemens SITRANS P310 Kompaktbetriebsanleitung Seite 27

5.4.2 Commissioning in gaseous environments
Usual arrangement
①
Pressure transmitter
②
Stabilizing valve
③ ④
Differential pressure valves
,
⑤
Differential pressure lines
Pressure transmitter above the differential pressure
transducer
Requirement
All shut-off valves are closed.
Procedure
To commission the pressure transmitter for gases, proceed as follows:
1. Open both the shut-off valves
2. Open the stabilizing valve
3. Open the differential pressure valve (
4. Check and, if necessary, correct the zero point when the start-of-scale value is 0 kPa (4 mA).
5. Close the stabilizing valve
26
Special arrangement
⑥
⑦
⑧
⑨
Pressure transmitter below the
differential pressure transducer
⑥
at the pressure tapping point.
②
.
③ ④
or ).
②
.
Shut-off valves
Drain valves
Condensate vessels (optional)
Differential pressure transducer
SITRANS P310 with HART
A5E35075329-01, 05/2015