Setting The Time; Operation; Weighing - Silvercrest 113060-15-01 Bedienungs- Und Sicherheitshinweise

Setting the time (Fig. A)
After you have inserted the batteries, the scale switches auto-
matically into the time mode
switched into the time mode
LC display
1
If the scale is in the weighing mode, press and keep pressed
the MODE button
the time mode
Press and keep pressed the TARE button
3 seconds to set the time.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
minute value flashes.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
Note: If you do not press another button within 60 seconds,
the set value stops to flash and the time is set.

Operation

Weighing (Fig. A)
If the scale is in the time mode
once to switch into the weighing mode.
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
1. Place the kitchen scale on a solid, flat surface.
12 GB
. In this event, skip the next two steps.
for approx. 2 seconds to switch into
3
.
5
2
2
. As soon as the scale has
5
, the hour value flashes in the
5
to set the desired hour value.
3
to confirm your setting. Then the
to set the desired minute value.
3
to confirm your setting.
, press the MODE button
5
for approx.
2
to speed up
3
to speed up
3
3