Inhaltsverzeichnis
Werbung
de
en
S Loosen the fastening screws on
the middle hinge (9). Remove the
refrigerator compartment door (2).
Loosen the plastic stoppers/screws (10)
on the left side and insert into the
boreholes (middle hinge) on
the other side.
S Remove the cover (11). Pull the cable
bushing (12) several centimetres out
of the refrigerator compartment door (2).
Place the bushing (12) with cable and
plug (13) in the compartment and close
the compartment with the cover (11).
S Remove the stoppers (18) from the left
side of the refrigerator compartment
door (2) and insert near the cover (11).
S Unscrew the upper hinge (15). Attach
the panel (20/accessory set). Remove
the panel (19) from the left side. Screw
the upper hinge (22/accessory set) on
the left side.
S Remove the cover (17). Take the
bushing (12) with cable and plug (13)
out of the compartment. Insert the cable
bushing (12) into the refrigerator
compartment door (2). Re attach the
cover (17).
S Connect refrigerator compartment door
(2) to the upper hinge (22). Warning! Do
not kink, wedge or damage cable
and plug! Attach the middle hinge (9)
with the fastening screws. Put on
washers for precision adjustment of the
refrigerator compartment door (2) and
the middle hinge (9).
6
S Open the refrigerator compartment door
(2). Insert the plug (13). Attach the panel
(21/accessory set). Attach the cap (16).
S Place the freezer compartment door (1)
on the pin of the middle hinge (9). Put
the bearing bush and spacer ring on the
lower stop (7). Screw in and tighten the
pin (8) (open end wrench A/F 8).
S Attach the base rim (5).
S Remove plastic stoppers and fastening
screws (4) from the handle. Remove
door handles (3) and attach on the
opposite side. Insert the plastic caps
into the open boreholes.
Warning!
Before switching on the appliance, leave it
to stand for at least 2 hours without
moving it.
Werbung
Inhaltsverzeichnis
