Transport Lock; Cleaning / Hygiene Requirements; Storage; Disposal - Nevadent NAZ 3.7 A1 Bedienungsanleitung

9.2 Transport lock

In order to secure the toothbrush against ac-
cidentally being switched on, activate the
transport lock.
• Switching on the transport lock:
Press the on/off switch
three LEDs 6, 7, 8 flash once.
• Switching off the transport lock:
Press the on/off switch
three LEDs 6, 7, 8 flash once.
10. Cleaning / Hygiene
requirements
DANGER! Risk of electric
shock!
Before cleaning the battery charger 14,
pull the mains plug 13 out from the
mains socket.
Do not immerse the toothbrush 4 and
battery charger 14 in water!
The battery charger 14 must be com-
pletely dry before you reconnect it to the
wall socket.
• To ensure the hygienic functionality of
the toothbrush heads 2 they must be
rinsed thoroughly after every use.
• Remove the toothbrush head 2 once per
week and clean it in hot water.
• Rinse the toothbrush 4 as well and wipe
it dry.
• Wipe the battery charger 14 with a
damp cloth if necessary, and rub it dry.

11. Storage

• Disconnect the device from the mains
and store it in a dry location.
20 GB

12. Disposal

This product is subject to the pro-
visions of European Directive
2012/19/EC. The symbol show-
ing a wheelie bin crossed
5 until the
through indicates that the prod-
uct requires separate refuse collection in the
European Union. This applies to the product
5 until the
and all accessories marked with this symbol.
Products identified with this symbol may not
be discarded with normal household waste,
but must be taken to a collection point for re-
cycling electric and electronic appliances.
Recycling helps to reduce the consumption
of raw materials and protect the environ-
ment.
The battery integrated into this
device must not be disposed of in
household waste. The device
must be disposed of properly
with the battery installed.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.