Canon imageRUNNER serie Anwenderhandbuch Seite 51

● To automatically assign an IP address using DHCP, RARP or BOOTP:
❑
NOTE
• 'DHCP' is selected as default.
• For more information on the IP address settings, see "Connecting the Machine to a
TCP/IP Network" in the e-Manual.
7
Specify the Remote UI Access Password.
IMPORTANT
2
Setting the Remote UI Access password is recommended to reduce the risk of
unauthorized access by outside third parties.
If you want to configure the settings later, press [Cancel] to skip this step.
2-10
Turning ON/OFF the Machine
Press [DHCP], [RARP], or [BOOTP].
❑
Press [OK].
❑
Enter the password in [Password] and
[Confirm] using -
➞ press [Next].
NOTE
Write down the password and keep it
in a safe place.
(numeric keys)