When The Machine Is Turned On For The First Time - Canon imageRUNNER serie Anwenderhandbuch

3
NOTE
• If the machine is managed with department IDs or user IDs, the log-in screen appears.
In this case, enter your department ID or user ID (and password). (See "Basic
Operations" in the e-Manual.)
• You can select the top screen of the desired function that appears when the machine
is turned ON. (See "Configuring the Machine's Basic Settings" in the e-Manual.)

When the Machine Is Turned ON for the First Time

When the machine is turned ON for the first time, the initial setup screens (Setup
Guide) appear on the touch panel display, navigating you to perform the following
basic setup items:
• Language and country/region
• Mixing the toner
• Date & Time Settings
• Fax settings (unit telephone number, unit name, and telephone line type)
• IP address settings
• Remote UI Access Password
Follow the procedure below to quickly set the machine configuration and use its
basic functions immediately.
Wait until the machine is ready to
scan.
The screen on the left is displayed until the
machine is ready to scan.
The screen on the left is displayed when the
machine is ready to scan.
Turning ON/OFF the Machine
2
2-3