Scanning From A Computer (Remote Scan) - Canon imageRUNNER serie Anwenderhandbuch

Scanning from a Computer (Remote Scan)

This section describes the basic operation procedure for scanning originals to load
the scanned images to a computer.
1
Switch the Machine Online
4
Press
the Scan/Print screen ➞ [Remote Scan]
➞ [Online].
• If the machine is in the Sleep mode, press
(Power).
• Enter your ID and password or insert the control
card if the screen prompts you to do so. (See
"How to Log in to the Machine," on p. 4-2.)
IMPORTANT
• If you want to use the machine as a network scanner, it must be connected to a
computer over an IPv4 network.
• The screen shots shown in this section may differ from the ones displayed on your
computer, depending on the application or operating system you are using.
4-12

Scanning from a Computer (Remote Scan)

(SCAN/PRINT) to display
2
Place Your Originals
Place your originals in the feeder or on
the platen glass.
• Close the feeder/platen cover after placing
your originals on the platen glass.