Canon imageRUNNER serie Anwenderhandbuch Seite 50

6
● To use a fixed IP address:
❑
Disable [DHCP], [RARP], and [BOOTP].
❑
Press [IP Address].
❑
Enter the IP address using
❑
Specify the [Subnet Mask] and [Gateway Address] settings in the same way.
❑
Enter the unit name (up to 24 characters)
using the on-screen keyboard ➞ press
[Next].
Press [Entry Mode] to select the desired
entry mode (<Alphabet> or <Others>).
If you want to configure the setting later,
leave the box blank and press [Next].
NOTE
For instructions on how to enter
characters, see "Basic Operations" in
the e-Manual.
❑
Select the type of telephone line ➞ press
[Next].
If you do not know the telephone line
type, contact your telephone service
provider for details.
Specify the IP address settings
➞ press [Next].
If you want to configure the settings later,
simply press [Next].
- (numeric keys).
Turning ON/OFF the Machine
2
2-9