Auto Power Function - Silvercrest SBTF 10 D4 Bedienungsanleitung

HANDS-FREE SYSTEM SBTF 10 D4
This information sheet is an integral part of the operating
instructions. Keep it together with the operating instructions.
Please also pass these operating instructions on to any
future owner of the product. Read the operating instructions
thoroughly and take particular note of the safety instructions.

Auto power function

The auto power function enables you to set the device so
that it switches back on automatically and connects to a
known mobile phone as soon as the built-in vibration sensor
is activated. The auto power function also works if
you have switched the device off manually. If you
no longer want the device to switch on automatically,
deactivate the auto power function.
The auto power function is switched on by default when
supplied. Further information is available in the operating
instructions.
Activate the auto power
function
♦ Press and hold the
button for about 2 seconds
to activate the auto power
function.
The operating/charging
LED lights up orange briefly.
Disable the auto power
function
♦ Press and hold the
button again for about
2 seconds to disable the
auto power function.
The operating/charging LED
flashes orange three times.
IAN 289819