Intended Use; Parts Description; Technical Data - LIVARNO LUX IAN 109613 Montage-, Bedienungs- Und Sicherheitshinweise

LED solar spotlight

Intended use

The LED solar spotlight is intended to illuminate outdoor areas without elec-
trical connection, e.g. garden sheds, garages, etc. The LED solar spotlight
is not suitable for commercial use.

Parts description

Main unit
1
Spotlight
2
Motion sensor
3
Electrical connector
4
Switch (AUTO / OFF / PIR)
5
Solar cell with built-in twilight sensor
6
Screw (4 x 30 mm)
7
Wall plug (ø 6 mm)
8
Bracket (solar cell)
9
Rechargeable battery compartment
10
Locking screws
11

Technical Data

Operating voltage:
Rechargeable battery:
Light bulb:
Solar cell:
Motion sensor:
Protection type:
6 GB
3.6 V
3 x NiMH battery 1.2 V
10 LEDs, 0.06 W each (LEDs not replaceable)
amorphous, 8 x 8 cm, max. 5.4 V, max. 70 mA
range: approx. 5–12 m,
detection angle: approx. 90° horizontal, 90°
vertical
IP44 (splash-proof)
, 600 mAh, AA