Eurochron 2203063 Bedienungsanleitung Seite 47

• Never use the product immediately after it has been brought from a cold room into a warm one. This may
cause condensation to form, which can destroy the product. Allow the product to reach room tempera-
ture before connecting it and putting it into use. This may take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Only power the product using the power adapter provided, or batteries.
• O nly connect the power adapter to a normal mains socket connected to the public supply. Before plug-
ging in the power adapter, check whether the voltage stated on the power adapter complies with the
voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable; always use the grips
on the plug.
• When setting up the product, ensure that the cables are not pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of
injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Unplug the mains plug from the mains socket if you do not plan to use the product for an extended
period of time.
• Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric
shock! Switch off the mains voltage to the socket containing the power adapter (switch off the corre-
sponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protec-
tive switch). You can then unplug the power adapter from the mains socket. Dispose of the faulty power
adapter in an environmentally friendly manner and discontinue its use. Replace it with a power adapter
of the same design.
• Do not place the product directly next to devices with strong electrical or magnetic fields (e.g. transform-
ers, motors, cordless telephones, wireless devices and radios), as these can prevent the product from
working properly.
47