Specifications - Makita UM164D Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
2-1. Lock-off button
2-2. Switch trigger
3-1. Indication lamp
4-1. Change lever
4-2. Protrusion on base frame
4-3. Base frame
5-1. Shear blades
5-2. Base frame
5-3. Blade cover
7-1. Groove
7-2. Base frame
8-1. Change lever
8-2. Protrusion on base frame
8-3. Base frame
9-1. Blade cover
10-1. Undercover
10-2. Locking lever
10-3. Press
10-4. Turn
11-1. Undercover
11-2. Shear blade
11-3. Crank

SPECIFICATIONS

Effective cutting width
Stroke per minute (min
Dimensions (L x W x H)
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Danger; be aware of thrown objects.
･
Keep bystanders away.
･
Cutting means continues to run after the
motor is switched off.
Explanation of general view
12-1. Blade cover
12-2. Shear blades
13-1. Recessed part of crank
13-2. Pins
13-3. Crank
13-4. Apply grease
14-1. Base plate
14-2. Hole in the base plate of shear
14-3. Oval holes that are overlapped
16-1. Undercover
16-2. Locking lever
18-1. Groove in the undercover
18-2. Locking lever
22-1. Brush
23-1. Machine oil
24-1. Blade cover
25-1. Bent part of the base plate of
26-1. Screws
27-1. Locking lever
27-2. Undercover
29-1. Groove in the undercover
29-2. Locking lever
Model
-1
)
Net weight
Rated voltage
Battery charger
blades
shear blades
END010-2
Cd
Ni-MH
Li-ion
6
30-1. Blade cover
31-1. Undercover
31-2. Locking lever
31-3. Press
31-4. Turn
32-1. Undercover
33-1. Screws
34-1. Crank
34-2. Shear blades
35-1. Grass shear blade cover
35-2. Grass shear blade
35-3. Storage case
38-1. Trimming direction
38-2. Tilt the blades
38-3. Hedge surface to be trimmed
39-1. String
43-1. Clamping nuts
43-2. Chip receiver
43-3. Screws on the shear blades
43-4. Blade cover to be always installed
before installing the chip receiver
44-1. Hook hole
UM164D
160 mm
1,250
292 mm x 178 mm x 130 mm
1.1 kg
D.C. 10.8 V
BL1013
DC10WA
･
Do not expose to moisture.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately