Front View Of The Hplc Pump K-1001 - Knauer WellChrom HPLC Pump K-1001 Handbuch

8
Front View of the HPLC Pump K–1001
Fig. 1
Fig. 2
Front Panel of the HPLC Pump K–1001
Fig. 1 shows the front view of the HPLC Pump K–1001. For additional
information on connecting the pump head see section „Connecting the HPLC
Pump K–1001 to other Instruments" on page 26 and Fig. 19 „Pump head:
Connection of eluent tubings" on page 26.
{1.1} {1.2} {1.3}
{1.12}
{1.11}
{1.10}
{2.1}
{2.1}
1 Display information
1.1 Program to be loaded
1.2 Program to be edited
1.3 Flow rate
1.4 |preset maximum| or
measured system pressure
1.5 State of Events
1.6 Go to the SETUP Menu
1.7 Go to the GLP Menu
1.8 Gradient mixing ratios
Display information and foil key area in detail
Setup of the HPLC Pump K–1001
{1.4} {1.5}
{1.9} {2.3}
1.9 elapsed Run Time
1.10 Status of program or Pump
1.11 Go to the VIEW Menu
1.12 Go to the LINK Menu
2 Foil Key Arear
2.1 Pump START / STOP
2.2 Purge START / STOP
2.3 Numeric Key pad
2.4 Arrow keys
{1} Display information
{2} Foil key area
{3} Pump head
{4} Pressure transducer
{1.6}
{1.7}
{1.8}
{2.4}