Packing List - Knauer WellChrom HPLC Pump K-1001 Handbuch

38

Packing List

The HPLC Pump K–1001 will be delivered together with one of the following
pump heads:
10ml-Pump head, order number A41301 or a
50ml-Pumpe head, order number A41303
The delivery consists of::
HPLC Pump K–1001 basic unit with pump head installed
●
User Manual
●
Power supply cable
●
RS232 cable
●
Set of plug strips and signal cables including
●
− 3 plug strips with four connections
− 2 plug strips with three connections
− 1 plug strips with two connections
− 1.5 m flat band cable with ten poles
− 1 WAGO latch lever
Set of tools including
●
− 1 wrench 13 x 17 mm
− 2 wrench 1/4´´x 5/16´´
− 1 hexagonal spanner 3 mm
− 1 cross screw driver no. 2
Syringe set including
●
− 1 syringe 10ml, Luer-Lock
− 2 Luer-Lock needles
− 1.5 m PTFE tube (ID 1.5 mm; OD 2.1 mm)
Eluent inlet set
●
− 1 fitting screw 1/8"
− 2 ferrules 1/8"
− 1 PTFE eluent filter with 1 m PTFE tubing (ID 1.5 mm; OD 1/8")
Solvent Organizer K–1500 for Low Pressure Gradients (optional)
●
including:
− 1 Solvent Organizer
− 1 Connecting cable (M1700)
− 1 Mixing inlet, including 4 blind fittings (G2746 mit P0747)
− 4m NoOx tubing
− 4 NoOx fittings kits(M1061-64)
− 4 PTFE tubings (ID 1.5 mm; OD 1/8") with PTFE eluent filters
− 1 Set Capillaries including fittings and ferrule
− 4 Bushings
− 4 Sealing rings
− 4 Brackets
− 4 Screws
− 4 Washers
Please fill out the registration card for guarantee and return it immediately.
Please remove the transparent protective foil from the pump outlet and the
display.
Packing List