List Of Display Messages; List Of Error Codes - Knauer WellChrom HPLC Pump K-1001 Handbuch

List of Display Messages

The following list shows messages that may appear in the main screen of the
HPLC Pump K–1001 and the pages on which they are described.
SYSTEMTEST OK
Conflict with existing programs
Start Time Is Fixed
Delete this line? Confirm by cursor
Error signal was detected

List of Error Codes

Table 4 Error codes in GLP Menu
Error Code
5
9
10
12
13
23
33
34
35
Meaning
Motor failure
ERROR IN signal detected
Switch off due to exceeding maximum current
Switch off due to exceeding maximum pressure
Switch off due to falling below minimum pressure
Motor blocked
Calibrating values re-initialized
Calibrating curve re-initialized
Combination from 33 + 34
37
11
14
21
23
30