Assembly Procedure; Install The Bracket - Panasonic TY-ST42PE7 Bedienungsanleitung

Assembly Procedure

1. Install the Bracket

(1) Fit the claw of the base into the cutout of the
bracket, and adjust the projection of the base to the
assembly hole of the bracket to insert.
Avoid mounting the bracket over the claw.
(2) While holding the bracket, lightly tighten the 2
assembly screws for bracket and then securely
tighten the screws to fix.
(3) Fix the opposite side as well.
(Tightening torque: 1.5 to 1.8 N•m)
2. Install the Display
Installation must be carried out by at least two
people.
(1) Insert the pedestal into the insertion opening on the
display till it stops.
(2) Use the assembly screws for display to securely fix
the display.
(Tightening torque: 1.2 to 1.5 N•m)
16
Bracket
Projection
Insertion opening
Assembly screw
for display
(Black) (4) ) ( ( ( ( ( ( ( ( )
Assembly screw for
bracket (Black) (4)
Base
Mating hole
Cutout
Claw
Insertion opening