VOLTCRAFT B6 Ultimate Bedienungsanleitung Seite 91

With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Briefly press the button "ENTER/START" in order to save. "ON" (or "OFF") then starts to
blink in the bottom display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Save the setting by pressing the "ENTER/START" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting or return to the main menu with the button "TYPE/STOP".)
Input Power Low Input Power Low Input Power Low
Input Power Low Input Power Low
Cut-Off Cut-Off
Cut-Off Cut-Off Cut-Off
This function monitors the voltage at the charger input (e.g. for a 12V battery). If the
voltage drops below the configured value, the charging process is stopped.
Briefly press the button "ENTER/START". The voltage value then begins to flash.
With the buttons "INC" or "DEC", you can set the voltage value (10 to 11V).
Save the setting with the button "ENTER/START"; the voltage stops blinking.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting or return to the main menu with the button "TYPE/STOP".)
Back-light Back-light
Back-light Back-light Back-light
Here you can set the brightness of the display.
Briefly press the button "ENTER/START". The brightness value then begins to flash.
With the buttons "INC" or "DEC", you can set the brightness.
Save the setting with the button "ENTER/START"; the brightness value stops flashing.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting or return to the main menu with the button "TYPE/STOP".)
10.0V 10.0V
10.0V 10.0V 10.0V
100% 100%
100%
100% 100%
91