VOLTCRAFT B6 Ultimate Bedienungsanleitung Seite 59

• Do not operate the product unattended. Despite a considerable number of
protective circuits, it is impossible to exclude the possibility of malfunctions
or problems during the charging process.
• Choose a solid, flat, clean and sufficiently large surface for the battery
charger and the battery.
Never place the battery charger and the battery on a flammable surface (e.g.
carpet). Always use a suitable, non-flammable, heatproof surface.
• Ensure that there is sufficient ventilation during operation. Never cover the
battery charger and/or the connected battery. Leave enough distance (at
least 20cm) between the charger, the battery and other objects.
• Never operate the device immediately after it has been taken from a cold
room to a warm room. Under certain circumstances the resulting condensa-
tion may lead to malfunctions or damage!
Allow the charger (and the battery/batteries) to reach room temperature
before connecting the charger to the power supply and using it. This may
take several hours!
• Maintenance, adjustments and repair work may only be carried out by a
specialist/specialised workshop. The device contains no parts that require
servicing or adjusting.
• If the product is used at schools, training facilities, do-it-yourself or hobby
workshops, it has to be supervised by trained personnel.
• Do not leave packaging material lying around carelessly. It might become a
dangerous toy for children!
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
If you are not sure about the correct connection or use, or if questions arise which
are not covered by these operating instructions, please do not hesitate to contact
our technical support or another qualified specialist.
59