VOLTCRAFT B6 Ultimate Bedienungsanleitung Seite 81

• To begin the charging process, keep the "ENTER/START" button pressed for longer
(approx. 3 seconds).
• If the settings are wrong, or if the charger detects a problem, an audio signal is emitted
and the appropriate information is shown on the display.
You can stop the warning signal by pressing the "TYPE/STOP" button. You then return
to the previous configuration menu.
• If the battery is detected correctly, the following display appears, for example:
Battery type
Pb-6 0.5A 12.59V Pb-6 0.5A 12.59V
Pb-6 0.5A 12.59V
Pb-6 0.5A 12.59V Pb-6 0.5A 12.59V
CHG 022:20 00207 CHG 022:20 00207
CHG 022:20 00207 CHG 022:20 00207 CHG 022:20 00207
Current charging duration
• Once the charging process has been completed, an audio signal is emitted.
If you wish to terminate the charging process beforehand, press the "TYPE/STOP"
button.
Charge current Battery voltage
Charge capacity in mAh
81