Power Supply Installation - Antec Signature serie Benutzerhandbuch

2.4

Power Supply Installation

Figure 8
The Power Supply Chamber features a distinct air intake that allows cool air to flow directly into the Chamber. This
allows the PSU to be mounted either with the fan facing up or facing down, depending on your preference.
1. Open the left side panel as demonstrated in Section 2.1, Figure 4.
2. Mount the power supply into the power supply mounting plate with the screws provided.
There are two ways of orienting the power supply:
Option 1: Mount the power supply with the fan facing down. It will draw cool air from the bottom of the case
through the washable Power Supply Intake Air Filter.
Option 2: Mount the power supply with the fan facing up. It will draw cool air from the front of the PSU chamber
through the washable Central Intake Air Filter.
rev 1C
Figure 9
Figure 10
S10 User Manual 11