Optional Central Intake Fan (Power Supply Chamber) - Antec Signature serie Benutzerhandbuch

4.4 Optional Central Intake Fan – Power Supply Chamber
There is a 120 mm fan bracket (fan not included) on the front of the Power Supply Chamber. You can install a 120
mm fan to help cool the power supply and the five 2.5" SSD drive bays within the Power Supply Chamber.
Note: From time to time, it will be necessary to clean the installed air filter. Not cleaning the air filter
will result in higher system temperatures and possible stability issues. We recommend checking
the air filter at least once a month initially. The frequency will change depending on system usage
(users whose systems run 24/7 will likely have to check/clean more often than those who don't
use their systems every day) and on environmental conditions.
To access the fan bracket:
1. Open the right side panel as demonstrated in Section 2.1, Figure 4.
2. The fan bracket is located on the front of the chamber held by a thumbscrew (figure 38).
3. Loosen the screw to pull the bracket out (figure 39).
4. You can install your fan and slide the bracket back to the location now.
Note: Install the fan in the direction that allows air intake
Figure 38
20 S10 User Manual
Figure 39 Figure 40
rev 1C