Hendi FineDine 239193 Gebrauchsanweisung Seite 7

Note:
1). After an extended period of operation, the cool-
ing fan can keep running after placing the ap-
pliance in STANDBY mode. This is normal, wait
until the cooling fan stops running before dis-
connecting the power supply.
2). The heating surface is hot after use, even af-
Error codes display
Error codes shown on the
display (3)
E01
E02
E03
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Possible cause
The temperature of the appliance is too high
The temperature of the cookware is too high.
Possibly, the cookware is empty and appli-
ance will shut down for protection.
Input supply voltage is too high (>260V~) or
too low (<145V~).
ter switching the appliance to STANDBY mode.
Please wait until the appliance is completely
cooled down before touching or cleaning.
3). If during operation the cooking equipment is
removed or not placed the machine will 'Beep,
and shut itself OFF within 1 minute.
Possible solution
Unplug the appliance, remove the cook-
ware, wait until the appliance is com-
pletely cooled down before trying again.
Unplug the appliance, remove the cook-
ware, wait until the appliance is com-
pletely cooled down before trying again.
Make sure that the appliance is connect-
ed to a suitable electrical power supply.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the appliance during
storage, it can damage the appliance.
EN
7