Cleaning The Ice Cube Container - hanseatic HFD18560A1WDI Gebrauchsanleitung

Page EN-26 Care and maintenance
Cleaning
1. Clean the ice cube container (34) as de-
scribed in section "Cleaning the ice cube
container" on page EN-26.
2. Wash the internal fixtures in warm water
with washing up liquid and dry thoroughly.
3. Wipe down the inside with warm water
and washing-up liquid.
4. When wiping clean, add a few drops of
vinegar to the water to prevent mould
from forming.
5. Only clean the door seals with clean wa-
ter; they are sensitive to oil and fat.
6. Rub everything completely dry, including
the door seals, and leave the door open a
while to air.
Using the appliance again
1. Re-insert the internal fittings.
2. Connect the mains plug to the socket or
switch on the fuse again.
3. To quickly cool the fridge and freezer,
switch on 'Super freeze' and 'Super cool'
at the same time (see page EN-15).
4. Place the frozen food back into the freez-
er once the freezer has reached a tem-
perature of −18°C and switch off 'Super
cool' and 'Super freeze'.
5. Set the desired fridge and freezer temper-
ature (see page EN-14).
Cleaning the ice cube con-
tainer
It is possible that ice cubes have stuck to-
gether in the ice cube container (34). In this
case, it is necessary to clean the ice cube
container.
1. If necessary, press the 'Ice On' but-
ton (18) to switch off the ice maker.
2. Disconnect the mains plug from the sock-
et or switch off the fuse.
3. Lift the ice cube container slightly (34)
and pull it out.
4. Dry all parts thoroughly.
5. Connect the mains plug to the socket or
switch on the fuse again.
6. Press the 'Ice On' button (18) to switch on
the ice maker.
(34)