Abicor Binzel ABIMIG GRIP W Betriebsanleitung Seite 14

EN English translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Signs and symbols used
4 Scope of delivery
5 Putting into operation
5.1 Equipping the torch
5.2 Mounting the wire guide
5.2.1 Liner
5.2.2 PA liner
EN - 2
EN-3 5.3 Connecting the cable assembly
EN-3 5.4 Connecting the coolant
5.5 Setting the shielding gas volume
EN-3 5.6 Feeding in wire
EN-3 5.7 Operating elements
EN-3 5.7.1 2-cycle trigger function
EN-4
6 Operation
EN-4
EN-5 7 Putting out of operation
EN-6
8 Maintenance and cleaning EN-11
EN-6 8.1 Cable assembly
8.2 Cleaning the torch neck
EN-6
EN-7 9 Disposal
EN-7
EN-8
EN-8
®
ABIMIG GRIP W
EN-9
EN-9
EN-9
EN-10
EN-10
EN-10
EN-10
EN-11
EN-12
EN-13
EN-13
BAL.0192.0 • 2019-03-06