Balluff BOS Q08M-UUI-KH22-S49 Betriebsanleitung Seite 16

Photoelectric Sensors
Red light diffuse reflective with background supression and IO-Link
BOS Q08M-UUI-KH22-...
Safety Notes
These photoelectric sensors may not be used in
applications where personal safety depends on
proper function of the devices (not safety
designed per EU machine guideline). Read
these operating instructions carefully before
putting the device into service.
Caution! Red light beam!
Glare and irritation of the eyes.
DO NOT LOOK INTO THE LIGHT BEAM!
The CE Marking confirms that our products
conform to the current EMC Law.
In our EMC Laboratory, which is accredited by the
DATech for Testing of Electromagnetic Compatibility,
proof has been documented that these Balluff products
meet the EMC requirements of the harmonized standard
EN 60947-5-2.
Application
Only for NFPA 79 applications (machines with a supply
voltage of max. 600 volts). Device shall be connected only
by using any R/C (CYJV2) cord, having suitable ratings.
Display Elements
Yellow LED light reception / stability indicator
LED on: Light at the receiver
LED flashes: Unreliable range
2 english
Order code Connector
BOS0270 BOS Q08M-UUI-KH22-S49
Cable with connector
BOS0271 BOS Q08M-UUI-KH22-00,2-S49
– Rugged housing
– Convenient setting via IO-Link
– Highly visible light spot for ease of alignment
– Comprehensive parameter setting options
IO-Link adjustable
IO-Link adjustable
Installation
Caution!
Do not stare into the light beam.
The sensor must be installed as to prevent a direct line of
eyesight to the light source, even during operation.
No additional protective measures are necessary for opera-
tion (Exempt Group according to EN 62471:2009).
Legend: 1) Emitter 2) Receiver 3) yellow LED
Fig. 1: Dimensions
Wiring diagramm
Fig. 2: Connection diagram, pinouts