Changing The Door Hinges - hanseatic JCF-88S Gebrauchsanleitung

Page EN-22 Start-up

Changing the door hinges

CAUTION
Risk of injury!
The glass door is very heavy.
Ask another person, if needed, to help
■
you with attaching or removing the
glass door.
NOTICE
Risk of damage!
Improper handling of the appliance
may result in damage.
Do not tilt the appliance more than 45°.
■
Do not lay it on its side.
■
Depending on the space conditions, you can
change the direction of the door hinges on
your appliance. This work, however, requires
you to have a certain degree of craftsmanship
skills. Please read the following steps com-
pletely before changing the hinges.
You will need the following tools to change
the door hinges:
– Medium size cross-tip screwdriver
– Medium size flat-headed screwdriver
1. Ensure that the appliance is not connect-
ed to the power supply.
(18)
2. Unscrew the two screws (18) from the
lower hinge.
3. Open the glass door and remove it.
(20)
4. Pull the hinge plate (19) out of the plastic
insert (20) at the bottom edge of the glass
door.
(21)
5. Rotate the glass door 180° and place the
hinge plate (19) into the plastic insert (21)
here.
(19)
(19)