(23)
6. Unscrew the three screws (23) on the
upper hinge (22) and remove it.
(24)
7. Unscrew the three screws (23) on the
lower hinge (24) and remove it.
(25)
(25)
8. Remove the 6 dummy plugs (25) from
the threaded holes above and below and
place them into the threaded holes on the
opposite side.
(22)
9. Screw the supplied upper hinge for the
left stop (26) using the screws (23).
(23)
(27)
10. Screw the supplied lower hinge for the
left stop (27) on the other side using the
screws (23).
Page EN-23
Start-up
(26)
(23)
(23)
(26)
(27)