Installation 5 - Vaillant electronicVED exclusive VED E 18/8 E INT Betriebsanleitung

– Product alignment: Vertically on the
wall
2. Use wall plugs and screws to secure
the mounting plate (1) to the fixing
points.
Danger!
Risk of electric shock caused
by penetrating water
The grommet prevents wa-
ter from penetrating along the
power supply cable and into the
product.
▶
Never cut off the grommet
completely.
▶
Cut the end of the grommet
in such a way that the sleeve
tightly surrounds the power
supply cable.
3. Fold the grommet up or down depend-
ing on the location of the power supply
cable.
4. Feed the cable through the grommet
and into the product's interior.
0020288446_00 electronicVED exclusive Installation instructions
4
3
5. Fit the product (2) to the retaining
screw (1) on the mounting plate.
6. Use the adjustment spindle (4) to ad-
just the product.
7. Use the fixing screw (3) to secure the
product.
5 Installation
1. If you are using plastic pipes, only use
those that are approved for normal
operating mode at 65 °C.
2. If you are using plastic pipes, only use
those that maintain a maximum tem-
perature of 95 °C and a maximum
pressure of 1 MPa (10 bar) for at least
one hour (check the manufacturer de-
tails).
3. Flush the cold water pipes thoroughly
before installation.

Installation 5

1
2
43