The battery is not fully charged at shipment. Before use, be
sure to charge the battery until the indicator lamp turns off
(up to 3 hours).
If the indicator lamp does not light, the USB-AC adapter
is not connected to the camera correctly, or the battery,
camera, or USB-AC adapter may be broken.
Date, time, time zone, and language
1
Press the n button to turn on the
camera.
●
The date and time setting screen is displayed when the
date and time are not set.
2
Use FG to select the year for [Y].
3
Press I to save the setting for [Y].
4
As in Steps 2 and 3, use FGHI and the
A button to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order).
5
Use HI to select the [x] time zone and
then press the A button.
●
Use FG to turn daylight saving time ([Summer]) on
or off.
6
Use FGHI to select your language and
press the A button.
Inserting an SD/SDHC/SDXC memory
card or Eye-Fi card (commercially
available)
1
Write-protect
Write-protect
switch
switch
4 EN
Insert the card straight until it clicks into place.
Do not touch the contact area directly.
2
1
1
Firmly close the battery/card/connector cover lock and
LOCK knob.
Shooting with the optimum aperture
value and shutter speed (P mode)
1
Press the n button to turn on the
camera.
If P mode is not displayed, press H to display the function
menu screen and then set the shooting mode to P.
Press the n button again to turn off the camera.
2
Hold the camera and compose the shot.
3
Press the shutter button halfway down to
focus on the subject.
●
When the camera focuses on the subject, the exposure
is locked (shutter speed and aperture value are
displayed), and the AF target mark changes to green.
●
The camera was unable to focus if the AF target mark
fl ashes red. Try focusing again.
4
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
Shooting movies
1
Press the movie record button to start
recording.
2
Press the movie record button again to stop
recording.
2
2
3
3